NoroGard R534 Batch Seed Treater.
The NoroGard R534 stands for an easily operated batch seed treater, designed for complex treatments with a coating capacity of 3,5 tons/hour. The seed treater comes with a range of customization options to make sure it fits your pelletizing and coating needs. The NoroGard R534 will allow you to apply treatment evenly in small dosages for good economy and correct treatment of each seed.
The NoroGard batch treaters are your obvious choice when you need a more complex treatment like pelleting, application of separate layers with drying in between and for small seeds like vegetable seeds.
Designed for complex treatments to meet high demands regarding application quality, reliability, operator safety and economy. Equipped to meet your needs for dressing, incrustation, coating and pelleting of seeds with diameter minimum 2 mm. Easy operated and controlled with an automatic PLC system.
The integrated scale allows you to vary the size of the batch. The maximum capacity, based on wheat with a hectoliter-weight of 85 kg, and mixing15 sec per batch, is 3,5 ton/hour.
Control system with manual calibration is made by pumping the treating liquid to a separate measuring glass in a closed system. When the settings and calibrations are made, the machine run continuously. It is also possible to get an even more sophisticated supervision system with a larger size touch screen. By adding NoroGard ULD Control system to your system you get an automatic calibration of dosage rates for both liquids and powders, and a continuous control of dosage rates. NoroGard R534 controlsystem holds a GSM modem for connection to NoroGard service department and/or connection from an optional device like mobilephone, tablet or computor to supervice your operations. All internet traffic is free during warranty, then you choose between continued support or independency.
The treatment as well as the treaters handling of the treatment liquid, from barrel to treating, takes place in a closed system. The maximum batch size is 20 liter of seed. You can add up to 10 separate liquid dosage systems, make adjustments and operate from a touchscreen with display. All vital parts are easily accessible for cleaning and service which makes the R534 fast up and running again after cleaning. By a simple cleaning you prevent the build-up of chemicals in the machine. With modern complex treatments R534 will allow you to apply treatment evenly in small dosages for good economy and correct treatment of each seed The R534 is approved for the European CE workers safety standard.
Options for control system:
• Manual without PLC control system.
• R534, Schneider PLC controlled with NoroGard software including recipe management and manual calibration.
• R534 ULD, Schneider PLC controlled w. NoroGard software including recipe management and automatic calibration with continuous flow control.
Options for ad on:
• Up to ten separate dosage units.
• Powder application systems.
• Air drying systems.
• Printer for printing out statistics.
• Pre-mixing station.
• Remote control box consisting of a touchscreen with display and a start/stop handle. This should preferably be placed at the filling-up station.
• Varied speed of rotor and spinning cup